a look at the finished 2nd layer, build-up, tips and products used and what to expect when using and how much you’d need.

Applying the 2nd layer of silicone rubber.

Checkout www.diniro.net This is a short video about the first test I made with the silicone rubber layer that I made on the plexiglass. Unfortunately it seems that it is not improving the coupling beetween the plexiglass and the rear projection film as I was expecting. In this test I try 2 different kind of projection surface: the Peroni Panorama that was kindly offered by Peroni itself and the Rosco Grey that was sent to me by Gravano from the nuigroup.com. At the end of the video you can see that just the nails tip touches are slightly visible, perhaps I just need more IR light by adding more IR leds or better polishing the plexiglass edge… I’ll find the solution!